Hi - Ihope U like this post
------------------------------
Step 1.
download all the usefull software.
1. pc suite (you can download from offcial website)
2. AppTRK.sis (47.1KB) (
3. OpenDNS
4. OpenDNS
5. pyserial-2.2.win32
6. 1.py (copy 1.py to ur PC c:\)
Step 2.
Install all the software.
AppTRK.sis on your phone .The others on PC by order in default
Step 3.
COM port
go to ur DeviceManager and find Com&LPT Section then find out ur UIQ3 Device Application Port ( Like it has been shown in those pictures above)
Step 4.
Edit the file 1.py
Open it with ur nice Editor.
Find the trip " ser = serial.Serial(4) # I have COM5"
You can use the "ctrl +F" order.
coz as u see my application port is 5 so it will appears like this --serial.Serial(4)-- the number (4) is just my port number minus 1
save it!
Step 5.
Run AppTRK.sis
install AppTRK.sis and run it on ur device and u will see the info (it should be connected like pictures above)
If not ,change the port 2 to 1 from settings
Step 6.
CMD and success
just run the script by typing " run c:\1.py" in ur CMD
After a few seconds,it will show">close ,>End+Exit", you have succed.
Step 7.
Try it
CLOSE ALL.
open x-plore or swissmanagerpro
open the private folder ,c:\ or d:\
--------------------------
Sorry I tried to upload it on opda but I couldnt ??!!
Plz someone upload this file on Opda thanx.
----------------------------------
Download link
